High temperature resistant low tack electrostatic protective film and high
temperature high tack electrostatic protective film can resist temperature
of 100℃-150℃ for about 33-40 minutes. These films are produced
according to configuration of imported film from Japan. It has stable heat
resistance. It can be used for different smooth surfaces to meet high
temperature resistance demand. The thickness, width and length can be
customized according to clients’ actual demand. Different colors are available.
Specification of colorful PE electrostatic film:
-
Material: PE
-
Color: Different colors can be customized.
-
Usage: For protecting acrylic panel, glass, high gloss plastic and so on.
-
Thickness: 0.05mm
-
Width: within 1850mm, can be customized.
-
Length per roll: Maximum 4000 meters
-
Production process: three-layer co-extrusion
-
Color: Blue, green, red
-
Temperature resistance: 150℃
Advantages of colorful PE electrostatic film:
1, Proper adhesion: Easy to apply and remove
2, Stable peel strength: As time goes, the adhesion changes very little. Peel strength
doesn’t increase after application. Easy to peel off. After removal, there is no residue
or dark shadow on the adherends surfaces.
3, Good weatherability: Can be stored for over one year with changing quality.
4, Non-contamination and non-corrosion: No adhesive. Will have no chemical reaction
with adherend surface.
5, Excellent mechanical properties: Can meet clients’ requirement about tensile
strength, modulus of elasticity, elongation and so on.
6, PE electrostatic film is with few crystal points. No snowflake, no dark shadow or
white smog. No wrinkles or lifting edges.
Application of colorful PE electrostatic protective film:
1, Protected surfaces should be clean and smooth to avoid chemical reaction.
2, PE electrostatic film should have proper adhesion on adherends to make sure it
doesn’t fall off during transportation and process.
|
Product Model
|
Adsorption on
glass surface
|
Main surfaces to protect
|
|
ISCE-14
|
1g/25mm
|
Various kinds of plastic sheets
|
|
ISCE-50-70A
|
3-4g/25mm
|
Glass lens and high light surfaces, can resist
temperature of 70 degree C
|
|
ISCE-50-70B
|
6-7g/25mm
|
PET electroplate, can resist temperature of 70
degree C
|
|
ISCE-50-70C
|
8-10g/25mm
|
High light plastic or smooth surface, can resist
temperature of 70 degree C
|
|
ISCE-30-70A
|
4-5g/25mm
|
Various kind of stamped plastic boxes surface,
can resist temperature of 70 degree C
|
|
ISCE-30-70B
|
7-8g/25mm
|
Various kind of stamped plastic boxes surface,
can resist temperature of 70 degree C
|
|
ISCE-50-50
|
100-200g/25mm
|
Color coated plate, aluminum composite panel
and etc. can resist temperature of 50 degree C
|
|
ISCE-50-150
|
10-15g/25mm
|
High light surface, can resist temperature of 150
degree C
|
|
ISCE-40-130
|
30-40g/25mm
|
Plastic sheet laminating and punching forming
under high temperature, can resist temperature
of 130 degree C
|
|
ISCE-50-100B
|
100-150g/25mm
|
Special products that are difficult to stick. can
resist temperature of 100 degree C
|
|
ISCE-50-100A
|
30-50g/25mm
|
Special products that are difficult to stick. can
resist temperature of 100 degree C
|
You may also interested in other products
1. Protective film with adhesive
Stainless steel protective film
Color steel protective film
Aluminum sheet protective film
Aluminum profile protective film
Glass protective film
ACP aluminum composite panel protective film
Plastic sheet protective film
Floor protective film
2. Hot melt adhesive film
Contact Ruby
Email: sales@wxisaac.com
Skype: ruby.dai324
Mobile: 86-15106175635
Website: www.wxisaac.com
Wechat: sunxiaoke104049
