Payment & Shipping Terms:
|Black And White, Customizable
|70 Microns, Customizable
|1m, 1.22m, 1.5m, 1.8m, Customizable
|500m, 700m, Customizable
|Specially For Protecting 8K Mirror Finished Stainless Steel
|Blow Molding,Multiple Extrusion
|Carton,Roll In Carton Or Can Be Customized,1/2/4/6 Roll/ctn,Wooden Pallet,protective Film + Pearl Wool+carton Or Customized Way
8K mirror finished stainless steel is also known as the mirror polished stainless steel and mirror steel. Use the polishing liquid to polish on the surface of the stainless steel plate through polishing equipment, so that the surface brightness is as clear as a mirror.
Scope of use is star hotels, shopping malls, wealthy clubs, colorful bars, luxury KTV, luxury decoration such as clothing display cabinets, etc. People mainly use protective films for decorations, such as hall wall panels, ceilings, elevator car panels, car panels, architectural decoration, signboards, and other decorative purposes.
The main possibilities for this problem 1 are:
Aiming at the above problems, Isaac conducted in-depth research and experiments from the following aspects. Some achievements have been made and a better protective film for 8K mirror finished stainless steel can be provided.
|50% Aqueous ethanol
|30% Aqueous ethanol
In order for the glue to adhere well to the surface of the substrate, the dyne value of the substrate should be 10 dyne higher than the dyne value of all glues.
The protective film of 8K mirror panel is generally PE film, so the Dyne value of the water-based pressure sensitive adhesive used for 8K mirror panel should be in the range of 23-28.
Anionic and nonionic emulsifiers with strong emulsifying ability are used together to obtain a water-based pressure-sensitive adhesive with relatively high wettability, and no gel is produced.
A small amount of special monomer is added to adjust the ratio of various monomers to make it low viscosity, low peeling force and high holding viscosity.